How one can Exchange a Dryer Belt
Studying the way to change your dryer belt will help prevent cash. You do not have to be a do-it-yourselfer to placed on a brand new dryer belt. It’s fairly a standard restore, and you may solely want a number of instruments to do it. You will want: Phillips screwdriver, putty knife, 5/16 socket or nut driver, and a small container for the screws. This text will clarify the way to change a dryer belt, for the fashions with the lint filter on prime.
In case your dryer has the lint filter on the highest, right here is the way in which to exchange the belt whirlpool dryer repair los angeles. The very first thing you must at all times do earlier than performing repairs on any equipment is unplug the unit from energy. Not doing so might end in extreme damages to your self and your equipment. Slide out your lint filter, and take away the 2 screws which are uncovered. Subsequent, take your putty knife and slide it beneath the highest of the dryer, pop up the highest by lifting up on the left and proper corners on the entrance of the dryer. Then elevate up the highest, flip it again, and prop it on a wall should you can.
Now that the within of the dryer is uncovered, you will want to take away the entrance panel to get to the belt. There are two screws it is advisable to take away to take off the entrance panel, and they’re positioned on the left and proper inside corners. As soon as the screws are taken out, you’ll be able to elevate off the entrance of the dryer. Typically you may must take away the door swap to fully take away the entrance.
Now you’ll be able to take away your outdated belt. It’s possible you’ll want one other individual that will help you to carry up the drum for this half. Take out your new belt, and place it over the drum with the grooves touching the drum, be certain it isn’t twisted in any other case it’s going to simply fall off when you begin your machine. Subsequent, you may must get beneath the drum the place the motor and pulley are positioned. The belt might want to undergo the pulley, and hooked up to the motor shaft. If this was carried out appropriately, the pulley will apply pressure to the belt.
Now you are carried out with the set up of your new dryer belt. And to complete you may must re-assemble your dryer. Whenever you put again the entrance panel of your machine, be certain the tabs on the underside are lined up with the panel itself, it ought to simply snap into place. Exchange the screws on the within proper and left corners, then flip the highest of the dryer again down. This also needs to snap again into place. Then simply put again the screws on the highest the place the lint filter goes, and slide the lint entice in. The very last thing is to plug in your dryer, and you will be again in enterprise.
I hope this text helped you discover ways to change a dryer belt!